|
|
Optimization of parameters of dynamic relaxation in solving plastic limit states of structures
Poláček, Milan ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The aim of the thesis is to create an analytical model of frame construction. Determining load at which individual plastic hinges are formed until the collapse of the structure. The analysis is going to be performed by RFEM with an additional module RFDYNAM. Subsequently, the parameters of dynamic relaxation is going to be optimized to specify and speed up the calculations. Finally, the optimized parameters is going to be used to analyze the storeyed frame construction formed Ing. Jan Vales including a comparison of findings.
|
|
| |
|
|
Verification of nonlinear material models
Prokš, Tomáš ; Němec, Ivan (referee) ; Hradil, Petr (advisor)
The bachelor thesis deals with verification of nonlinear material model of soil FHWA SOIL during shear test. The nonlinear problem was being solved by software LS-DYNA using explicit formulation of finite elements method. The values of horizontal displacements during the direct shear test were compared with the results listed by the developer of the material. The considerable difference in the results led to focusing on the settings of the material model and influence of application of load, geometry and type of finite elements on the monitoring values.
|
|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Comparison of various methods for nonlinear analysis of structures from the point of view of speed, accuracy and robustness.
Bravenec, Ladislav ; Křiváková, Jarmila (referee) ; Němec, Ivan (advisor)
The aim of the thesis is to compare the iterative methods which program RFEM 5 uses the non-linear calculations of structures, namely the analysis of large deformations and post critical analysis. Comparison should serve as a basis for which calculation method is the most accurate, fastest and most reliable in terms of getting results. Time-consuming will be judged according to the calculation of the solution and the time needed to compute one iterativ. Robustness we will compare the reliability of methods in in normal use. Accuracy of the calculation will be determined by comparing the maximum deformation structures. Comparison will be made with examples from practice.
|
|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Optimization of parameters of dynamic relaxation in solving plastic limit states of structures
Poláček, Milan ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The aim of the thesis is to create an analytical model of frame construction. Determining load at which individual plastic hinges are formed until the collapse of the structure. The analysis is going to be performed by RFEM with an additional module RFDYNAM. Subsequently, the parameters of dynamic relaxation is going to be optimized to specify and speed up the calculations. Finally, the optimized parameters is going to be used to analyze the storeyed frame construction formed Ing. Jan Vales including a comparison of findings.
|
|
|
Comparison of various methods for nonlinear analysis of structures from the point of view of speed, accuracy and robustness.
Bravenec, Ladislav ; Křiváková, Jarmila (referee) ; Němec, Ivan (advisor)
The aim of the thesis is to compare the iterative methods which program RFEM 5 uses the non-linear calculations of structures, namely the analysis of large deformations and post critical analysis. Comparison should serve as a basis for which calculation method is the most accurate, fastest and most reliable in terms of getting results. Time-consuming will be judged according to the calculation of the solution and the time needed to compute one iterativ. Robustness we will compare the reliability of methods in in normal use. Accuracy of the calculation will be determined by comparing the maximum deformation structures. Comparison will be made with examples from practice.
|
|
|
Computer simulation of building collapse due to formation of plastic hinges
Valeš, Jan ; Kala,, Zdeněk (referee) ; Vlk, Zbyněk (advisor)
The aim of the thesis is to create an analytical 2D model of a multi-storey building and its consequent loading until the point of collapse which occures due to formation of plastic hinges. The first part is going to present a linear analysis of the problem; it focuses on location and level of load when the plastic hinges are formed. Then a nonlinaer analysis is going to be performed by RFEM programme using postcritical analysis and dynamic relaxation. Differences between the results of mentioned types and methods of analysis are going to be compared and an impact of variables is going to be evaluated .
|
|
| |
guest ::
